Tech Woodworking Machinery
39-0721-400309

Bordatrice monolaterale IDM OLIMPIC N 300-68

Features

Description and features:

CONTROL SYSTEM 
• Numerical control PIC 200
• Adjustable hanging command board to control the machine
• Incorporated electrical cabinet
TECHNICAL FEATURES
• Panel working height with straight edge min - max 10-60 mm
• Edge thickness in coils min - max 0,4-3 mm
• Edge thickness in strips-narrow pieces min - max 0,4-16 mm
• Track in-feeding speed 8-30 m/min
• Dimensions of machine (L1xL2xH) 7.740x1.800x1.800 mm
PANEL INTRODUCTION AND FEEDING SYSTEM
• Slide driving chain
• Top pressure with idler rollers in double row
• Top pressure with electronic positioning
• In-feeding track manually adjustable
• Lateral panel support with aluminum track complete with supporting wheels
RECTIFYING UNIT  
• In-feed pre-milling unit TT/A with nr. 2 motors to rectify the side of the panel – Motors power 2 kW (2,8 HP) 12.000 rpm
GLUING UNIT, LOADING AND EDGE PRESSURE
• Gluing unit VC 34-2 QMS
• Disk coil holder
• Gluing system for EVA glue - Glue bowl and premelter for hot melt glue - Pneumatic exclusion for glue bowl
• Guillotine to cut the edge in rolls with automatic regulation of the shear pressure
• Edge pressure roller - Nr. 1 + 3 pressure rollers
EDGE BANDING AREA
• Anti-adhesive unit to allow the optimum cleaning of the workpiece on the upper and lower surface of the panel
• End-cutting unit YU-750 with nr. 2 motors to cut the excess of the edge on the front and back of the panel - Motors with automatic tilting 0°/15° - Working speed 25 m/min depending on the thickness of the edge - Motors power 0,33 kW (0,44 HP) 12.000 rpm each - Automatic exclusion of the unit
• Rough trimming unit R with 2 motors to reduce the excess edge on the top and bottom of the panel - Motors power 1 kW (1,4 HP) 12.000 rpm each - Automatic exclusion of the unit
• Fine trimming unit RF 97/0,5 with 2 motors for trimming and chamfering of the excess edge on top and bottom of the panel  - Composed by nr. 4 revolver with nr. 8 positions with manual adjustment - Motors power 0,5 kW (0,7 HP) 12.000 rpm each - Automatic exclusion of the unit
• Rounding unit PR 1-2-3-4/94 with nr. 4 motors for automatic edge corners on top and bottom of the panel 
• Scraping unit RAS/97 to eliminate the imperfections derived from previous work on the top and bottom edge - Pneumatic exclusion of the unit- Complete of chip collection box
• Glue scraping unit to remove any glue excess on the flat surface of the panel near the edges
• Brushing unit  with nr. 1 motor to clean and polish the rounded edge
• Top Buffing unit for the reactivation of the color of the edges
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Protection and sound-proof cabin of the working units
• Suction system on the top of the protection cabin




Request information:

Request information

Possible options:

Printable version Back