Tech Woodworking Machinery

Bordatrice monolaterale BIESSE AKRON 445 con ritorno pannelli


Description and features:

• Numerical control Touch Panel TS10 of 10''
• Programming and control system with the following characteristics: screen color - visual display - "touch screen" system
• Operating system WINDOWS CE
• Adjustable hanging command board to control the machine
• Incorporated electrical cabinet
• Working panel height with straight edge min - max 10-60 mm
• Edge thickness in coils min - max 0.4-3 mm
• Edge thickness in strips – narrow pieces min - max 0.4-10 mm
• Track feeding speed 12-18 m/min
• Total installed power 13 kW 
• Slide driving chain
• Special anti-wear rubber blocks with high coefficient of friction for the workpiece seal
• Top pressure unit made with double row of idle wheels
Top pressure unit with electronic positioning controlled by NC
• In-feeding track adjustable from CN
• Lateral panel support with aluminum track complete with supporting wheels
• In-feed pre-milling unit FI-502 with AUTO-SET system to rectify the side of the panel. It is composed by nr. 2 motors with automatic timer intervention to avoid splinters on the panel with axis controlled by NC - Motors power 3,5 kW 12.000 rpm each
• Anti-adhesive unit ADZ-700 to allow the optimum cleaning of the workpiece on the upper and lower surface of the panel (placed before the pre-milling unit)
• Infrared lamp IRL-700 for heating the panel edge before application of the glue
• Gluing unit VC-511 with axis controlled by NC
• Disk coil holder
• Roll with short pins for veneer
Double gluing system to use hot-melt EVA glue and polyurethane PU glue
• Glue tank for EVA glue - Glue bowl for hot melt glue
• Glue tank for polyurethane glue - Glue bowl for PUr glue
Pre-melting system gPoD 
Nitrogen bowl for maintaining polyurethane glue
• Guillotine to cut the edge in rolls with automatic regulation of the shear pressure
• Edge pressure roller with timed rollers on straight profile - Nr. 1 motorized pressure roller diam. 100 mm, nr. 2 pressure rollers diam. 60 mm with positioning by NC
• End trimming unit IN-801V with nr. 2 motors with Flex system to cut the excess edge on the front and rear of the panel which allows automatic adjustment of the surplus edge - Motors with pneumatic inclination 0°/15° by NC - Motors power 0,8 kW 12.000 rpm
• Rough-fine trimming unit RI-501 for trimming and chamfering of the excess edge on top and bottom of the panel - Unit equipped with 4 axes by NC for multiprofile milling tools adjustment - Motors with inclination 0°/25° - Pneumatic exclusion from NC - Working speed 18 m/min - Motors power 0,65 kW 12.000 rpm
• Rounding unit with CR-200V with FAST system with nr. 4 positions controlled by NC for automatic edge corners rounding on top and bottom of the panel. It is composed by nr. 2 motors with pneumatic positioning by NC - Working speed 12 m/min - Motors power 0,65 kW 12.000 rpm
• Edge scraping unit RBK-502 for edge finishing - Pneumatic exclusion from NC
• Glue scraping unit RCC-701 for the removal of excess glue from the join between edge and panel - Complete with aspiration kit - Pneumatic exclusion from NC
Grooving/milling unit TA-501 for the horizontal or vertical shaping and/or milling of the panel - Motors with inclination 0°/90° with automatic time intervention - Motors power 3,5 kW
• Overlapped brushing unit SP-501 with nr. 2 motors for cleaning and polishing the rounded edge - Motors power 0,37 kW 2.800 rpm
• Buffing unit PH-501 to reactivate the color of thick plastic edges of after scraping, with nr. 1 blower 2 kW with adjustable temperature 
Automatic unloading and return system complete with belt and roller conveyor for unloading from edgebander and motorized belt conveyor for panel return
• Dimensions of belt and roller conveyor 2.600 x 2.000 mm
• Dimensions of motorized belt conveyor 1.500 x 6.350 mm
• CE Marks
• Protection and sound-proof cabin of the working units
• Suction system on the top of the protection cabin

Request information:

Request information

Possible options:

Printable version Back